Windows USB/DVD Download Tool came home in 17m51s which puts it toward the top of the ISO to USB timings board. Features: Bootloader options, file systems and overrides, grub4dos, syslinux, QEMU. RMPrepUSB is one of the most complete ISO to USB packages on this list. Boot Camp Assistant is normally used to partition the hard drive of a Mac in order that it can be booted into either Mac OS X or Microsoft Windows. In this case, Boot Camp Assistant will be used only to create the USB installer and it is necessary to pay attention so as not to partition the internal hard drive, or SSD, inside the Mac.
- Before you begin
Before you begin
To install Windows 10 Education Edition from IUware, or if you have a Windows 8.x or 7 installation disk but do not have an optical (CD/DVD) drive on your computer, you can create a bootable flash drive for the installation.
On a Windows computer, you can use either a tool from Microsoft, or the Rufus software; using the Microsoft tool is generally simpler, while Rufus has some additional features.
What you'll need
To complete the process, you'll need:
- A Windows or macOS computer connected to the internet.On a Windows computer, you must have administrator privileges.
- A flash drive with at least 8 GB of space for Windows 10 and 8.1, or at least 4 GB of space for Windows 7The process described below will delete any data currently on your flash drive. Make sure to back up your flash drive's data to another storage location before proceeding.
- A valid product key that came with your Windows software. For Windows 10, this will be available on IUware. For Windows 8.x or 7, this will be with the disc you purchased.
Insert your flash drive before beginning.
Create a bootable installation flash drive forWindows 10 Education Edition
This process will delete anything saved on your flash drive. Save anything you want to keep before following these steps.
- Go to the IUware Windows 10 Education page, and select either the 32-bit or the 64-bit version. Review and accept the terms, and then click Get product key. Copy the product key to use later.
- Download and run the Academic Media Creation Tool. Accept the license terms, select Create installation (USB flash drive, DVD, or ISO file) for another PC, and click Next.
- On the 'Select language, architecture, and edition' prompt, leave the default selections.
- To have the Microsoft tool create your bootable flash drive, make sure your flash drive is plugged in, select USB flash drive, and click Next.If you plan to use Rufus instead, select ISO file and click Next. This will save the
.iso
file to your computer; then, to use Rufus and your.iso
file to create a bootable installation flash drive, follow the directions below.
Create a bootable installation flash drive forWindows 8.1
Because Windows 8 is no longer supported, you must create a Windows 8.1 bootable flash drive and upgrade to Windows 8.1.
Download Windows 8.1
To download Windows 8.1: https://brazilpowerup724.weebly.com/descriptive-statistics-tool-in-excel-for-mac.html.
- Go to Microsoft's Download Windows 8.1 page.
- From the Select edition drop-down menu, select Windows 8.1, and click Confirm.
- Select the desired language and click Confirm.
- Select the 32-bit Download or the 64-bit Download (recommended, unless the machine you're installing on doesn't support it), and download the disk image.
You can now use the
.iso
file to create a Windows 8.1 bootable installation flash drive using either a Windows tool or Rufus.Create a bootable drive using the Windows USB/DVD Download tool
This process will delete anything saved on your flash drive. Save anything you want to keep before following these steps.
This method formats the flash drive using the NTFS file system, which is incompatible with UEFI (secure boot). You will have to disable secure boot, if enabled, in order to boot from a USB drive made using this tool.
To create a bootable installation flash drive using the Windows tool:
- Download and install the Windows USB/DVD Download tool. The final four letters of each file (before
.exe
) represent the language and region of the installer. Download the one for your desired language/location. - Open the Windows USB/DVD Download tool. The tool refers to itself as a Windows 7 tool, but works for 8.1 media creation as well.
- When prompted, browse to your
.iso
file, select it, and click Next. - When asked to select the media type for your backup, make sure your flash drive is plugged in, and then choose USB device.You may be prompted to insert the USB device even if the flash drive is already inserted. Ignore this, and choose the USB device you'll be writing to.
- Click Begin Copying. If prompted, confirm that you wish to erase the flash disk.
- The
.iso
files will start copying to the flash drive; the process can take several minutes. When it's finished, close the wizard and eject and remove the flash drive.
Create a bootable drive using Rufus
To use Rufus to create a bootable drive that is compatible with UEFI, follow the instructions below.
Create a bootable installation flash drive for Windows 7
At IU, you have two options for creating a bootable installation flash drive for Windows 7:
- The Support Center will create a bootable installation flash drive for you at the IU Bloomington Support Center walk-in location; bring a blank flash drive with at least 4 GB of storage.
- If you are unable to visit a walk-in location or would prefer towork with the
.iso
file yourself, download the Windows 7.iso
from Microsoft's Download Windows 7 Disc Images (ISO Files) page.
You can now use the
.iso
file to create a Windows 7 bootable installation flash drive using either a Windows tool or Rufus.Create a bootable drive using the Windows USB/DVD Download tool
This process will delete anything saved on your flash drive. Save anything you want to keep before following these steps.
This method formats the flash drive using the NTFS file system, which is incompatible with UEFI (secure boot) You will have to disable secure boot, if enabled, in order to boot from a USB drive made using this tool.
To create a bootable installation flash drive using the Windows tool:
- Download and install the Windows USB/DVD Download tool. The final four letters of each file (before
.exe
) represent the language and region of the installer. Download the one for your desired language/location. - Open the Windows USB/DVD Download tool.
- When prompted, browse to your
.iso
file, select it, and click Next. - When asked to select the media type for your backup, make sure your flash drive is plugged in, and then choose USB device.You may be prompted to insert the USB device even if the flash drive is already inserted. Ignore this, and choose the USB device you'll be writing to.
- Click Begin Copying. If prompted, confirm that you wish to erase the flash disk.
- The
.iso
files will start copying to the flash drive; the process can take several minutes. When it's finished, close the wizard and eject and remove the flash drive.
Create a bootable drive using Rufus
To use Rufus to create a bootable drive that is compatible with UEFI, follow the instructions below.
Use Rufus to write an .iso
file
- Download Rufus. Rufus is a standalone program and does not require installation.
- Open the Rufus program from where you downloaded it to run it.
- From the Device drop-down menu, select your USB drive, if it isn't automatically selected.
- Under 'Boot selection', select Disk or ISO image (Please select), if it isn't already chosen, and then click SELECT to choose the
.iso
file you downloaded. - Leave 'Image option' set to Standard Windows installation.
- Leave 'Partition scheme' set to GPT.
- For 'Target system', select UEFI (non CSM).
- Under 'Format Options', to ensure the flash drive is compatible with UEFI, select FAT32 for 'File System'.
- To create the flash drive with the 'Press any key to boot from USB' prompt at startup, under the 'Advanced format' options, select Create extended label and icon files.
- When you are finished selecting options, click Start. When prompted, confirm that you want to erase the flash disk.
- The
.iso
files will start copying to the flash drive; the process can take several minutes. When Rufus is done, close the program and eject and remove the flash drive.
Create a bootable installation flash drive on a macOS computer
In macOS, the option to create a Windows flash drive appears only when the computer does not have an optical drive. If your Mac has an optical drive, the option will be either missing or grayed out.
- From the Finder, open the Applications folder, and then Utilities.
- Open the Boot Camp Assistant, and then click Continue. The next screen should give you a list of options.
- UITS recommends making the USB drive installer first. You don't need to install Windows or download the support software at this time, as it will be easier to do both later. To proceed:
- Verify that the USB drive you will be writing to is plugged in.
- Uncheck the Install Windows 7 or later version and Download the latest Windows support software from Apple options.
- Check Create a Windows 7 or later install disk and click Continue.
- Your USB drive should be listed in the 'Destination disk' area. Use choose to browse to your
.iso
file; after selecting it, click Continue. - If prompted, confirm your action and/or provide an administrator password. The process of writing the
.iso
file to the USB drive can take 20 minutes or longer.
Other resources
Website | Article |
---|---|
Windows 10 Forums | How to create a bootable USB flash drive to install Windows 10 |
Windows Eight Forums | How to create a bootable UEFI USB flash drive for installing Windows 7, Windows 8, or Windows 8.1 |
How-To Geek | How to create bootable USB drives and SD cards for every operating system |
Techverse | How to create a bootable Windows 7 USB flash drive |
A bootable copy of OS X or macOS on a USB flash drive is a great emergency backup tool to have on hand. It allows you to be ready to go almost immediately should anything happen to your existing startup drive.
Why a flash drive? A bootable external or internal hard drive works well for desktop Macs but presents a cumbersome problem for notebook Macs. A flash drive is a simple, inexpensive, and portable emergency boot device that can handle OS X or the macOS. Heck, it can even have both operating systems installed, letting you use the emergency USB flash drive to boot any of the Mac's you may have. Even if you don’t use a notebook, you may want to have a bootable USB flash drive on hand.
What You Will Need
- An Intel-based Macintosh
- An install DVD of OS X 10.5 (Leopard), OS X 10.6 (Snow Leopard) or the downloaded installer image of OS X 10.7 or later or macOS Sierra and later.
- A 16 GB or larger USB flash drive
We’ve chosen to use a 16 GB or larger flash drive as a minimum for two reasons. First, a 16 GB flash drive is large enough to accommodate the current minimum amount of space required to install OS X directly from the install DVD, or macOS from a download from the Mac app store, or from the Recovery HD.
Eliminating the need to pare down the OS to get it to fit on the USB flash drive significantly simplifies the installation process. Second, the cost of USB flash drives is falling. A 16 GB USB flash drive is large enough to install both a complete copy of the macOS and some of your favorite applications or recovery utilities, making it a budget-friendly emergency device that can boot your Mac and possibly repair or recover its data and get it running again.
Using a larger flash drive can allow you to install multiple versions of the Mac operating system, or include additional utilities and apps you feel would meet your needs in an emergency. We've used a 64 GB flash drive divided into two 32 GB partitions to allow us to install OS X Yosemite and macOS Sierra which is the two Mac OS's used on our Mac's here at home.
of 04
Wintoflash
Selecting a USB Flash Drive for Booting Your Mac
Selecting a USB flash drive to use for creating a bootable OS X or macOS device is actually relatively straightforward, but here are some concerns to consider and a few suggestions to make the selection process easier.
Compatibility
The good news is that we haven’t come across any USB flash drives that are not compatible for this purpose. If you check the specifications of USB flash drives, you may notice that they sometimes don’t mention Macs, but fear not. All USB-based flash drives use a common interface and protocol to ensure compatibility; Mac OS and Intel-based Macs follow these same standards.
Size
It’s possible to install a bootable copy of OS X on USB flash drives smaller than 8 GB, but it requires fiddling around with OS X’s individual components and packages, removing the packages you don’t need, and paring down some of OS X’s capabilities.
For this article, we’re going to forego the extra steps and all that fiddling, and instead install a fully functional copy of OS X onto a USB flash drive. We recommend a 16 GB or larger flash drive because it’s big enough to install a complete copy of OS X, with room to spare for a few applications.
This is also true of macOS, the later versions of the Mac operating system. 16 GB is really the smallest size flash drive you should consider, and like just like most storage issues, bigger is better.
Speed
![Usb boot tool mac os Usb boot tool mac os](/uploads/1/2/6/3/126307544/488940258.jpg)
Speed is a mixed bag for USB flash drives. In general, they’re pretty speedy at reading data but they can be agonizingly slow at writing it. Our primary purpose for the USB flash drive is to serve as an emergency boot and data recovery drive, so we’re most concerned with read speed. Focus on read speeds rather than write speeds when you shop for a USB flash drive. And don’t be alarmed when it takes longer than normal to install the Mac OS, because you will be writing lots of data.
Type
USB flash drives are available in multiple flavors of the USB interface. While the standards tend to change over time, currently USB 2 and USB 3 are the two common interface types. Both will work with your Mac, but if your Mac has USB 3.0 ports (most Macs since 2012 have USB 3 ports), you will want to use a flash drive with USB 3 support for the faster read and write speeds available.
If you're using a MacBook with USB 3-C ports, you will likely need an adapter to go between USB 3-C and USB 3. Apple is the primary source for this type of adapter, but as USB-C gains popularity, you will be able to find third party suppliers at reasonable prices for the adapters.
of 04
Format Your USB Flash Drive for Use with the Mac
Most USB flash drives are formatted for use with Windows. Before you can install OS X on a USB flash drive, you will need to change the drive’s formatting to the standard used by OS X (Mac OS X Extended Journaled).
Format Your USB Flash Drive
- Insert the USB flash drive into your Mac’s USB port.
- Launch Disk Utility, located at /Applications/Utilities/.
- In the list of drives attached to your Mac, select the USB flash drive device. In our case, it’s called 14.9 GB SanDisk Cruzer Media. (Like lumber, hard drives and flash drives are actually slightly smaller than their specs would have you believe.)
- Click the Partition tab.
- Select 1 Partition from the Volume Scheme drop-down menu.
- Enter a descriptive name for your flash drive; we chose Boot Tools.
- Select Mac OS X Extended (Journaled) from the Format drop-down menu.
- Click the Options button.
- Select GUID Partition Table from the list of available partition schemes.
- Click OK.
- Click the Apply button.
- A sheet will drop down, warning you that you are about to erase all data from the disk. Click Partition.
- Disk Utility will format and partition your flash drive.
- Quit Disk Utility.
If you're using OS X El Capitan or later you may notice that Disk Utility looks and operates a bit different. The process for formatting your flash drive is very similar to what is outlined above.
![Windows usb boot tool for mac Windows usb boot tool for mac](https://www.acronis.com/sites/default/files/inline_images/bootable-usb.jpg)
Enable Ownership of Your USB Flash Drive
In order for a drive to be bootable, it must support ownership, which is the ability of files and folders to have specific ownership and permissions.
- Locate the USB flash drive on your Mac desktop, right-click its icon, and select Get Info from the pop-up menu.
- In the Info window that opens, expand the Sharing & Permissions section, if it’s not already expanded.
- Click the lock icon in the bottom right corner.
- Enter your administrator password when asked.
- Remove the check mark from Ignore ownership on this volume.
- Close the Info panel.
of 04
Install OS X or macOS on Your USB Flash Drive
Once you complete the previous step, your USB flash drive will be ready for you to install OS X.
Install OS X
We prepared the USB flash drive by partitioning and formatting it and then enabling ownership. The flash drive will now appear to the OS X installer as just another hard drive that is ready for installation of OS X. Because of our preparation, the steps for installing OS X will be no different than a standard OS X installation.
Usb Boot Tool Mac Os X
Having said that, we recommend that you customize the software packages that OS X will install. Free flowchart software for windows. Because of the limited space on the USB flash drive, you will need to remove any printer drivers that you don’t use, as well as all of the extra language support that OS X installs. Don’t worry if this sounds complicated; the installation instructions we link to here are step-by-step guides and they include information on customizing software packages.
Before you begin the installation, a few notes about the process. As we mentioned earlier, USB flash drives are much slower at writing data. Since the installation process is all about writing data to the USB flash drive, it’s going to take quite some time. When we performed the installation, it took about two hours. So be patient, and don’t worry about how slow some of the processes seem; this is normal. You can expect to see plenty of beach balls and slow responses as you work your way through the installation process.
Ready to install? Click the link below for your OS and follow the step-by-step guide.
of 04
Using a USB Flash Drive as a Startup Volume
Now that you have installed OS X on your USB flash drive, you’ve probably noticed how slow it seems. This is normal for flash-based drives, and there’s not much you can do about it, except to buy the fastest USB flash drive in your price range.
If speed is a big issue for you, you can entertain the idea of purchasing a small SSD in a portable enclosure. Some manufacturers are making SSDs that are just slightly larger than the standard flash drive. Of course, you will pay a premium for the speed.
It’s important to remember why you’re creating this startup drive. It’s for use in an emergency, when your Mac won’t boot, either because of a hard drive problem or a software-related problem. A bootable USB flash drive will help you get your Mac back to working condition, by letting you use all of the tools a fully-working Mac has available.
In addition to being able to use Disk Utility, the Finder, and Terminal, and have access to the Internet, you can also load some specific emergency tools onto your USB flash drive. Here are some of the utilities we suggest installing. You don’t need to have all of them; in fact, it’s unlikely they would all fit onto the flash drive after you install OS X, but having one or two certainly makes sense.
Emergency Utilities
Windows Usb Boot Tool For Mac
- Data Rescue for data recovery.
- DiskWarrior for data recovery, disk testing, and disk repair.
- Drive Genius for disk repair, defragmenting, partitioning, copying, and other useful tools.
- TechTool Pro for memory testing, drive testing, data recovery, and Mac hardware testing.